Buffered Splitter, Isolated (Active)

dpFX Isolated Splitter (Active / Buffered), transformer isolated, phase reverse
Transformer Isolated, active, buffered splitter.
This triple splitter has 3 buffered outputs with the first one being isolated (using audio transformer) in case you want to avoid ground loops when sending the output into different amps. The first output is also equipped with a Phase-Reverse switch.
Suitable for both bass and guitar or any other instrument with similar pickups. It gives you the ability to split the signal of your instrument into multiple separate outputs without degrading your signal's clarity or tone. Each one of the outputs is equal and identical to the input.

▹ Send your instrument's signal to multiple amps.. A separate pedal chain can be connected to each output.
▹ Send your signal into two pedal-boards, and a recording device (usually through a DI). While you play and hear your actual sound, you can record your clean signal at the same time. (in case you need it e.g. for re-amping)
▹ If placed first on your pedal-chain it also serves as a buffer.
▹ Use as many of the outputs you desire, just leave the unused outputs unconnected.
▹ Voltage Required: DC 9-15 Volt (using 15Volts gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Max Current draw: 16mA @ 9V
▹ Input impedance: 5MΩ 
▹ Output impedance: <1kΩ 
▹ Equipped with indicative LEDs to show you when the pedal is powered.
In the photos a 3-way splitter is shown but we can build it with as many outputs you may require.
dpFX Isolated Splitter (Active / Buffered), transformer isolated, phase reverse dpFX Isolated Splitter (Active / Buffered), transformer isolated, phase reverse dpFX Isolated Splitter (Active / Buffered), transformer isolated, phase reverse