Mini, 2-way isolated, buffered splitter.
This signal splitter has 2 buffered outputs and is suitable both for bass and guitar. The first output is isolated using a transformer in case you want to avoid ground loops when sending the output into different amps and it is also equipped with a Phase-Reverse switch. The isolated output can also be connected either to a balanced or unbalanced input.
The splitter gives you the ability to split the signal of your instrument without degrading your signal's clarity or tone. Each one of the outputs is equal to the input. Suitable for both bass and guitar or any other instruments with similar signal-levels (it can also handle lower line level signals)
▹ Send your instrument's signal to two amps simultaneously, avoiding ground loops. ▹ Send your signal into two pedal-boards, and a recording device (usually through a DI). While you play and hear your actual sound, you can record your clean signal at the same time. (in case you need it e.g. for re-amping)
▹ Voltage Required: DC 9-18 Volts (higher voltage gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Max Current draw: 6mA @ 9V | 9mA @ 18V
▹ Input impedance: 3MΩ
▹ Output impedance: ~700Ω
▹ In the isolated output you can connect either balanced or unbalanced equipment.
▹ Equipped with indicative LEDs to show you when the pedal is powered.
▹ Enclosure dimensions: [ inches: 3.65 x 1.52 x 1.22 ], [ mm: 93 x 40 x 32 ]
▹ Weight: ~130gr.
The splitter gives you the ability to split the signal of your instrument without degrading your signal's clarity or tone. Each one of the outputs is equal to the input. Suitable for both bass and guitar or any other instruments with similar signal-levels (it can also handle lower line level signals)
▹ Send your instrument's signal to two amps simultaneously, avoiding ground loops. ▹ Send your signal into two pedal-boards, and a recording device (usually through a DI). While you play and hear your actual sound, you can record your clean signal at the same time. (in case you need it e.g. for re-amping)
▹ Voltage Required: DC 9-18 Volts (higher voltage gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Max Current draw: 6mA @ 9V | 9mA @ 18V
▹ Input impedance: 3MΩ
▹ Output impedance: ~700Ω
▹ In the isolated output you can connect either balanced or unbalanced equipment.
▹ Equipped with indicative LEDs to show you when the pedal is powered.
▹ Enclosure dimensions: [ inches: 3.65 x 1.52 x 1.22 ], [ mm: 93 x 40 x 32 ]
▹ Weight: ~130gr.