4-way Buffered Splitter (active)

dpFX pedals - 4way splitter, with footswitches
Split your signal 4-way without tone or volume loss.
This is a 4-way Buffered-Splitter, suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.
Every output is buffered and equal to the input (zero volume drop) and each one has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom. (DO NOT EXCEED 18V).

All input/output jacks, including the DC-jack are placed in the top-side of the enclosure (check photo above) to help you save space on the left & right side.
All outputs and the input have a common ground.
If you need this splitter with isolated outputs just drop us a message, give us the specs and we can offer a customized solution.

▹ Input impedance: 1MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-18V DC [Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V  ||  15mA @ 18V
dpFX Pedals 4-way splitter with footswitch4-way splitter, active, buffered4-way buffered splitter, active, with footswitches