This is an active, buffered, 4-way Splitter suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.
Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.
The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom (DO NOT EXCEED 18V) so that you can also use it for line level signals.
All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.
The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom (DO NOT EXCEED 18V) so that you can also use it for line level signals.
All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.
▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-18V DC [Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V || 15mA @ 18V
▹ Enclosure dimensions: 120 x 95 x 35 mm