Suitable for both bass and guitar.
Triple splitter with output selection footswitches and LPF controls. Split your signal into three outputs which you can separately turn ON/OFF through footswitches. Usefull if you are using multiple amps and you want to turn on/off each output and select amp in real time.
Each output has a dedicated LPF control, letting you choose how much highs you want to filter or not.
It can be built with common ground outputs OR with 3 isolated outputs if you require it in case you want to avoid ground loops, in that case it has to be the last pedal before the amp.
▹ Voltage Required: DC 9-15 Volt (using 15Volts gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Input impedance: 5MΩ
▹ Output impedance: 100Ω
▹ Current consumption: 30mA @ 9V
Each output has a dedicated LPF control, letting you choose how much highs you want to filter or not.
It can be built with common ground outputs OR with 3 isolated outputs if you require it in case you want to avoid ground loops, in that case it has to be the last pedal before the amp.
▹ Voltage Required: DC 9-15 Volt (using 15Volts gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Input impedance: 5MΩ
▹ Output impedance: 100Ω
▹ Current consumption: 30mA @ 9V