Clean-up your signal with LPF→HPF variable filters in series
This active filter is consisted of a variable Low Pass and a variable High Pass filter placed in series (LPF→ HPF).
For the LPF you can select a cut-off frequency anywhere inside the range 220Hz-16.5kHz by using the respective knob and for the HPF you can select a cut-off frequency anywhere inside the range 200Hz-20Hz by using the respective knob. The curve of both filters is quite steep offering a 12dB/octave attenuation.
The LPF will help you “clean up” the low end of you signal and the HPF will help you “clean-up” the harsh high end of your audio signal such as fret buzz, string noise, and higher harmonics or noise produced from other effects in your chain such as distortion pedals.
The device It will work fine with active or passive instruments, as well as with other devices such as synths, pedals, preamps, or even in FX loops. It can also be used with line level signals.
For the LPF you can select a cut-off frequency anywhere inside the range 220Hz-16.5kHz by using the respective knob and for the HPF you can select a cut-off frequency anywhere inside the range 200Hz-20Hz by using the respective knob. The curve of both filters is quite steep offering a 12dB/octave attenuation.
The LPF will help you “clean up” the low end of you signal and the HPF will help you “clean-up” the harsh high end of your audio signal such as fret buzz, string noise, and higher harmonics or noise produced from other effects in your chain such as distortion pedals.
The device It will work fine with active or passive instruments, as well as with other devices such as synths, pedals, preamps, or even in FX loops. It can also be used with line level signals.
▹ HPF Cut-off frequency range: 200Hz-20Hz (12dB/octave)
▹ LPF Cut-off frequency range: 220Hz-16.5kHz (12dB/octave)
▹ Input impedance: 5Mohm
▹ Output impedance: 100ohm
▹ Voltage required: 9V (max 24V)
▹ Polarity: Negative tip
▹ Current consumption: 10mA
▹ Weight: ~123gr.
▹ Enclosure dimensions: 93x40x32mm (3.66 x 1.52 x 1.26in)
▹ LPF Cut-off frequency range: 220Hz-16.5kHz (12dB/octave)
▹ Input impedance: 5Mohm
▹ Output impedance: 100ohm
▹ Voltage required: 9V (max 24V)
▹ Polarity: Negative tip
▹ Current consumption: 10mA
▹ Weight: ~123gr.
▹ Enclosure dimensions: 93x40x32mm (3.66 x 1.52 x 1.26in)
