4-way Buffered Splitter, Active

4-way buffered SPLITTER, active, not-isolated
4-way splitter for guitar and bass.
This simple Buffered-Splitter gives you the ability to split the signal of your instrument into multiple separate outputs without degrading your signal's clarity or tone.
In the photos a 4-way splitter is shown but we can build it with as many outputs as you require.
Suitable for both bass and guitar or any other instrument with similar pickups.

The outputs are not isolated, the input and all outputs have common ground. (check here the isolated version)

Split the signal of your instrument into 4 separate outputs without degrading your signal's clarity or tone.
▹ Suitable for both bass and guitar or any other instrument with similar pickups.
▹ The splitter also serves as a buffer
▹ The input and all outputs have common ground.
Power filtering to avoid additional hiss/hum.
▹ High quality jacks

▹ High input impedance: 10MΩ
▹ Low output impedance: 100Ω (for each output)
▹ Required power supply: 9-18V DC. (using 18Volts gives you more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Negative tip
▹ Current draw: 10mA @ 9V
▹ Use as many of the outputs you desire, just leave the unused outputs unconnected.

- Equipped with indicative LED to show you when the pedal is powered.
- Enclosure dimensions: 4.43 x 2.38 x 1.22 in   (114 x 60  x 32 mm)