Classic Dub Siren sounds
LGM-1 is an analog dub siren with a transistor based circuit. It offers the most classic siren sounds that were widely used in reggae sounds back in the 70s and are still on use in countless cases.
Its three knobs offer control over the PITCH, the MODE and the RATE of the siren effect while three momentary push buttons help you shape the resulting sound in real time. The right most push button offers a special effect for the designated combination of the RATE and MODE knobs (marked with “~” and a yellow line).
A volume knob is also available offering more flexibility in changing the output level on the fly.
A volume knob is also available offering more flexibility in changing the output level on the fly.
General Specifications:
▹ 3 control knobs / 1 Volume knob / 3 Push buttons
▹ Output jack: TS 1/4’’, 6.35mm
▹ DC jack 5.5/2.1mm
▹ Flashing LED for siren rate. Power-On LED.
▹ Metal enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Voltage Required: 9V // Do not exceed recommended voltage. //
▹ Polarity: Center negative
▹ Current Draw: ~25mA
▹ Output jack: TS 1/4’’, 6.35mm
▹ DC jack 5.5/2.1mm
▹ Flashing LED for siren rate. Power-On LED.
▹ Metal enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Voltage Required: 9V // Do not exceed recommended voltage. //
▹ Polarity: Center negative
▹ Current Draw: ~25mA