It combines and mixes the L & R channels of a stereo signal (TRS in) down to a single channel (TS out). The volume of each channel of the stereo input: (T)-Tip & (R)-Ring can be controlled by the respective knobs. (Left-TIP, Right-Ring). A phase reverse switch is available for the R-channel.
It is compatible with instrument level signals and line level signals as well (unbalanced). If you ever need more headroom (e.g. for hot line level signals) you can increase the power supply up to 24V which will offer you ~22Vpp headroom.
The very high impedance of the inputs and the very low impedance of the output ensures the best possible inter-connectivity with your gear and that your signal will maintain its clarity and tone.
Specifications:
▹ 1 TRS input / Impedance: 1Mohm
▹ 1 TS output / Impedance: 100ohm
▹ 2 knobs for separate volume control of the L & R input channels.
▹ Power supply range: 9-24V (polarity: center negative)
▹ Approximate headroom vs supply voltage: 7Vpp@9V || 10Vpp@12V || 22Vpp@24V
▹ Approximate headroom vs supply voltage: 7Vpp@9V || 10Vpp@12V || 22Vpp@24V
▹ Current consumption: 8mA (@ 9V)
▹ Aluminum Enclosure, dimensions: 115 x 60 x 32 mm (4.43 x 2.38 x 1.22 in)
▹ Weight: 170gr.
