4-way Stereo Splitter, active

⯍ Labels: , , ,
4-way Stereo Splitter, active
Split your stereo signal 4-way without tone or volume loss.
This is the 4-way Stereo splitter (active). This device gives you the ability to split a stereo (or mono) signal into four (4) separate stereo outputs without degrading its clarity or tone. It is suitable for instrument level and line level signals as well.

All jacks are TRS but you can also connect a mono (TS) signal to the input and expand it to stereo in the four outputs as long as you flip the Input toggle switch to the TS-position.

  • Input impedance: TRS mode=10MΩ  /  TS mode=5MΩ
  • Output impedance: 100Ω (each output)
  • Required power supply: 9-24V DC. (higher voltage gives you more headroom) [Do not exceed 24V]
  • Available Headroom vs Power supply: 7Vpp@9V, 10Vpp@12V, 22Vpp@24V
  • Polarity: Center Negative
  • Current draw: 19mA @ 9V
  • Power supply filtering to avoid additional hiss/hum.
  • Use as many of the outputs you desire, just leave the unused outputs unconnected.
  • The input and all outputs have common ground.

- Equipped with indicative LED to show you when the pedal is powered.
- Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
- Weight: 290gr
4-way Stereo Splitter, active 4-way Stereo Splitter, active 4-way Stereo Splitter, active 4-way Stereo Splitter, active
Tags: , , ,