DUAL BUFFER eliminates signal-loss & tone-loss issues caused by your pedalboard and by the use of long cables. The Dual Buffer circuit makes use of FET transistors to achieve very high input impedance and very low output impedance ensuring the perfect impedance load on your instrument's pickups, while also sending the exact signal to your amp.
When no plugs are inserted to the SEND & RETURN jacks, INPUT will be routed directly to the OUTPUT jack.
▹ It features IN, OUT and SEND, RETURN (effects loop).
▹ Voltage Required: DC 9-18Volts (Use 18V if you need more headroom)
[Do not exceed recommended voltage! It may damage the circuit.]
▹ Current draw: 6mA @ 9V
▹ Input impedance: 3ΜΩ (IN, RETURN)
▹ Output impedance: <1kΩ (OUT, SEND)
▹ Input impedance: 3ΜΩ (IN, RETURN)
▹ Output impedance: <1kΩ (OUT, SEND)
▹ Enclosure dimensions: 114 x 60 x 32 mm (4.43 x 2.38 x 1.22 in)