This is a Stereo Preamp capable of handling Instrument Level signals and Line Level signals as well. It can take an instrument level signal and boost it up to line level, and even further.
You can use it for your pedal board, for sending your audio signal to recording devices, for home audio recordings and for general audio applications where you want to improve the signal to noise ratio (SNR) of your audio.
The high input impedance (10Mohm) combined with the very low output impedance (100ohm) ensures the best interconnectivity with the rest of your gear while maintaining your signal's clarity & tone.
The input/output knobs act as 'attenuators' and when they are set at their mininum they mute the signal. The boost knob ranges from 0dB (min) up to +30dB (max).
Specifications in brief:
▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Boost up to +30dB
▹ Max input voltage swing: ~7.5Vpp (Input/Output knobs at max. Boost at min.)
▹ Max output voltage swing: ~24Vpp
▹ Standard TRS jacks (6.35mm, 1/4")
▹ Standard TRS jacks (6.35mm, 1/4")
▹ Supply required: 9V DC (negative tip)
▹ A dedicated internal circuit takes the 9V supply and converts it to dual rail supply (+15V, 0, -15V) in order to provide the maximum possible headroom.
▹ Current draw: 45mA
▹ RF filters at the input prevent any unwanted wireless interference (e.g. radio signals etc) from entering to the audio path.
▹ RF filters at the input prevent any unwanted wireless interference (e.g. radio signals etc) from entering to the audio path.
The specifications listed above can be modified by your request.
